The Star Micronics printers that Epicuri uses have a self-print feature, which summarises the state of the printer. 


To print the self-test on the thermal printer (650 series):


  1. Make sure the printer is plugged in, but not switched on
  2. Press the feed button, and keep it pressed
  3. Switch the printer on and continue to keep button pressed until the printer starts to output, then let go.
  4. The self-test will fire up within a few seconds. It will print some switch information first, pause, and then print network / IP settings



To print the self-test on the impact printer (700 series):


  1. Make sure the printer is plugged in, but not switched on
  2. Press the feed button, and keep it pressed
  3. Switch the printer on and release the button as soon as you hear a single beep (it happens fast!)
  4. The self-test will fire up within a few seconds. It will print some switch information first, pause, and then print network / IP settings